Click on image to zoom, mouse over to view detail.

Polywater - SqueekyKleen - Single Use Towelette

POL-TC1

Read Review(s) | Log in to Review

Manufacturers Code: TC-1,TC1

Cleans off pik without the use of alcohol

•Minimal wiping (2 wipes only)

•No residue •Safe to use on ribbon fiber

•Fans fiber quickly •

Cleans fiber squeaky clean

•Tested and approved New SqueekyKleen™ cleans and fans fiber in two wipes without alcohol, saving time and money.

Hear the difference! No follow-up with alcohol required to get fibers squeaky clean and separated when prepping for splicing.

SqueekyKleen™ is less harsh on hands and reduces chemical odors and vapor concentrations to a minimum in splice trailers and vaults.

SqueekyKleen's™ unique formulation and specially designed high-performance towelette work to remove pik from the entire surface of loose-tube or ribbon fibers, leaving no residue.

SqueekyKleen™ helps keep splice equipment clean of contamination for better fiber alignment and splice quality. Safe on acrylate and Mylar®.

1 (EA) in Stock

^CA$3.50

/ EA

Qty:

Specifications

Specifications

Cleaning:

When wiping a 3-foot section of 12-count fiber from a buffer tube, the pre-saturated towel will squeak and fan fibers with 2 wipes.

Solvency Power:

At 68° F (20°C), will dissolve .020" (.5mm) film of PE/PJ or ETPR grease completely from cable jacket with less than two minutes of vigorous agitation (no wiping).

Residue:

When placed on a clean glass panel and dried, the solvent shall not leave any visible residue (<100 ppm).

Water Content:

When tested by the ASTM 1533B method, water content shall be less than 75 ppm. Flash Point: When tested via a Pensky-Martin Closed Cup Test (ASTM D93), the cleaner shall have a flash point above 140°F.